I'm an Industrial Technology teacher and have access to many new tools. I am very disappointed with this Dewalt Product. I still don't understand why they didn't put a reversable switch on this unit. It would have been great for installing and removing Kitchen cabinets. Moreover, when using spade bits to drill through flooring, you periodically need to "back" the bit up to remove it when it becomes bound. I think a better purchase would be a temporary 90 degree chuck that mounts to a portable drill. Be very careful when setting this unit on the ground ... it's super easy to hit the start switch and if you've got a large spade bit in the chuck "watch out!!" I also would like to see a variable speed adjustment as this drill does create a lot of torque and can easy twist and sprain you wrist if you're not anticipating it.

I did a lot of looking around at medium right angle drills. The drawbacks on the Dewalt is no variable speed, and no reversing. So it may be prone to stripping screws, and now way to reverse them out when they do. Ouch. For straight drill of holes it is great. brIf you have air around, and don't need to make large holes in 2x12s, the air driver Porter Cable is sweet. Has air pressure, to create torque and variable speed adjustments, and has reversing capabilities, and is the best price on the block. brMy pick is the Makita 110 volt model. It has the largest amperage motor in the medium duty range, has variable speed, reversing, and an adjustable speed limiting dial, an LED light to illuminate your work, and is guaranteed to last the lifetime of the tool. brNext is the Bosch with a slightly weaker motor at 3.8 amps, and doesn't have the speed range of the Makita, even though it is at the same price. Nice overall tool though. brThen comes the Milwaukee 55 degree angle drill. Fine for additional leverage while drilling, but could be a problem for deeper access areas when making 90-degree applications. Especially important in crammed quarters, when you would have to swing the body out the additional 35 degrees to get a 90-degree angle. brBlack and Decker makes a lightweight unit, and will suffice for the occasional weekend warrior. brThe Dewalt unit, fills a niche, but is a very good example of getting what you pay for. If it were not for the no reversing, and no variable speed capabilities, and for making the paddle switch so long, that gets in the way, even when you don't want it to, makes the unit, strictly for those who are price conscious first, and tool conscious later. brWake up and smell the Makita. :-)

I bought one of these for my father, a retired electrician who occasionally still takes jobs. At first, he loved this little drill. The only shortcomings he noticed in the beginning were the lack of a keyless chuck and the fact that the paddle-switch could be dangerous if you weren't paying close attention to what you were doing. In the end though, what became this drills downfall was the cheap construction inside the housing. After only a few jobs, a plastic component around the motor cracked, allowing the teeth to slip under strain. A DeWalt service shop charged... to fix this problem. The second hole it drilled after that caused the gears to give out. It was a great idea, but DeWalt needs to send this one back to the design board for more work... I wish now that I had spent the extra money on the bigger DeWalt right angle drill.

The construction of the DeWalt DW160 right angle drill is surprisingly good being that the enclosure is all plastic. The drill trigger is ruff cast aluminum and sized for someone with a certain size hand. The drill is made for right hand users and can not be converted to lefty. The trigger design could be improved upon by removing the bar that runs from the top to the bottom of the drill to allow you to grip the drill fully and not end up inadvertently turning it on. The weight of the drill is very good and the compactness is exceptional. It would have been better if this drill was available with a keyless chuck. The drill motor is very quite and supplies smooth operation but does not have variable speed. The power it provides for drilling through floor joists is more than adequate.

I own this particular drill, although it is a powerful drill for a compact right angle drill, the major draw back for me is the non-reversing feature. What I have needed to use it for mostly is driving in screws in compact areas such as the inside of cabinets. If there is a need to remove the screw for adjustment of what you are working with you are really up a creek. Other than that it is also not variable speed which is not critical but would definitely be a plus if it were variable speed. I would recommend the makita model although not as powerful it has all the things the dewalt model lacks. P.S. A friend of mine has this drill and while trying to change the bit with the drill plugged in accidentally hit the trigger driving the chuck key deep into his hand. VERY PAINFUL!

Bought this drill while I was rewiring several rooms in my house. Got it to drill through floor joists, and it did just that very well. Compact size with good power.pThe handle/trigger is tricky, and I unplug it before changing bits or if I'm done using it for awhile. Otherwise you're likely to activate the drill accidentally. Did it once, luckily didn't get hurt.pBut, the length of the trigger is good for one thing. With 2 x 10 joists, I was able to get the drill bit up into the upper part of the joist without having to stick my hand all the way up there. No keyless chuck, but that may be why it's compact. Keyless chucks are about 2-3 times as long as a keyed chuck, so for size issues, I don't mind it here.

The plastic gard around the chuck is strange and there is no reverse. It might be ok for wood.

Horrible little drill!!!! No variable speed, no reverse!!!You better be perfect because god forbid you must back a screw out, no reverse. Hard to start screws w/o variable speed. I replaced this drill w/ bosch's 1132vsr rt. angle drill. I am happy with the bosch, it is head and shoulders above the dewalt. I gave the Dewalt to my father in-law.

I purchased this drill two years ago when it first came out. While this drill is certainly heavy duty, it has been a disappointment. It has a very dangerous switch which is easily turned on when you are working in awkward positions, as typical with right angle drills. Also, it lacks variable speed and reverse which was not clear in the description when I bought it. My brother has a Milwaukee (made by Sioux) right angle drill which is hands down better which I would recommend instead.

The large paddle switch that covers the handle makes it difficult to grab the drill without turning it on. Switching the bit out (with a keyed chuck), I got my hand caught in the chuck key, grabbed the handle, and off to the medic.
br /
br /And no variable speed means its more difficult to drive screws without stripping them, and no reverse means you're back to the manual screwdriver. C'mon dewalt.

I have used this tool for several years, and bought it instead of the Milwaukee close-quarter drill because the DeWalt seemed to measure a little less in depth, which I preferred for access to tighter spaces. I generally like the DeWalt, but the reason I only give it three stars instead of four or five is from what I perceive to be a safety issue. The DeWalt has a large switch trigger (the large silver colored thing in the photo) which is helpful when working in close quarters, but you have to watch what you are doing when you go to pick the drill up. There does not appear to be an interlock on the trigger, and I have had several occasions where just picking up the drill caused it to start because I inadvertently activated the switch when picking up the drill. Luckily there were no serious consequences. It seems to me that this tool should have an interlock (at least I didn't see one) such as on some right angle air tools, that require a lever or similar to be flipped before the paddle switch can be engaged.

I didn't pay close enough attention when I ordered this drill. I failed to notice that it was not variable speed or reversible. All I saw was that it was the cheapest one. OK, so make sure it does what you want. If it does what you want, it works fine! I really have no complaints about the drill as it is. It has plenty of torque. The keyed chuck is very good quality. The paddle switch works fine, and is made out of metal (I think it's cast aluminum.) The switch is long and it pivots sideways - the hinge is parallel to the body/motor. I can get a good working grip at several places along the body, or with the drill twisted around in my hand at a wide range of angles. I can't blame the drill for my mistake, and besides, it has served me well in a couple tight places inside walls and and between some hard to reach ceiling joists. It is pretty compact, which is definitely a benefit. If I had it to do again, I would buy the 12volt DeWalt right angle VSR drill that uses the same batteries as my regular DeWalt cordless drill. But now that I have this one, I'm all set! Oh, one more thing; notice that it does not come with any kind of case. It just comes in a DeWalt yellow box. That's not a big deal, unless you are expecting a case.

I have one of these drills that I bought because my husband and I do a lot of remodeling work. While I would have liked a reversing switch, the light weight and VERY compact profile are a dream for my small hands. In response to another reviewer's complaints about the paddle switch being too easy to turn on by accident, I have trouble with the more conventional switch on my husband's Milwaukee, 3/8" right-angle drill. I feel that this is merely a matter of personal preference.

While remodeling my home, we were taking up the floor boards on the second floor, so we could access the electric to the first floor ceiling fans. The house is old and still had gas pipe in the floors from the old 'gas lighting', and to add to the confusion it still had the knob and tube wiring. Needless to say it was tight working between the joists. Thats were the DeWalt DW160 came in....it fit down inbetween the joists nicely, and had enough power to get the job done. As mentioned in another review, and keyless chuck would have been great, but other than that this drill is a great thing to have around.

I consider this one of the most dangerous tools in my shop and will soon be replaced. This tool was poorly designed and is unsafe.